Rinvii angolari

Range-C

Compact Cubic, Low to High Torque Gearbox

The Range-C bevel gearbox is an compact cubic unit, available in 5 sizes with 5 gear ratios and has improved mounting options.

The compact design is made possible by the central bearing housing for the 1:1 and 1.5:1 gear ratios, and a small extended bearing housing on the input side of the bevel gearboxes with ratios 2:1 and above. The performance of the gearbox delivers a high torque rating unit with good thermal characteristics and is available in solid shaft and hollow output shaft configurations. Mounting points are available on all 6 sides of the gearbox and there is an optional motor mounting flange, for easy direct coupling of a standard electric motor.

Top

Range-N

Ultra Compact Low to High Torque Gearbox

The bevel gearbox is an ultra compact unit and is available in 5 sizes with 5 gear ratios.

Employing a central bearing housing support on the 1:1 and 1.5:1 gear ratios, and a small extended bearing housing on the input side of the bevel gearboxes with ratios 2:1 and above. It is a high torque rated unit with good thermal characteristics. It is available in solid shaft and hollow output shaft configurations with the optional motor mounting flange, for easy direct coupling of a standard electric motor.

Top

Range-U

Subsea Gearbox

The Range-U bevel gearbox is part of the U-Series proposition from Power Jacks: a range of electro-mechanical subsea products specifically designed to operate at maximum efficiency in an underwater environment.

The Range-U Bevel gearboxes have proven depth ratings of up to 3,000m and capacities up to 20,000Nm as standard. On request they can go even deeper.

They possess all the qualities you’d expect of Power Jacks products — strength, reliability, durability and high performance. And that means they’re ideally suited to operate in the toughest subsea conditions, anywhere in the world.

Top

Range-P

Compact Low Torque Gearbox

A compact “monobloc” bevel gearbox design provides a visually attractive, quality finished casing, produced from die-casting, in lightweight aluminium alloy.

Several alternative fixing options are provided each via 4 fixing holes as well as through 4 holes in integrally cast, small base-mounting bosses on widely-spaced centres for more stable mounting to top or bottom - thereby offering universal and exceptionally firm attachment facilities. A series of bevel gearboxes with three hole mounting in the gearbox casing is also available.

Top